Our shop

• High quality imaging with 5 MP resolution
• 24/7 colorful imaging
• Excellent low-light performance
• Water and dust resistant (IP67)
• Efficient H.265+ compression technology

• 4-in-1 TVI / CVI / AHD (up to 4K) and Analog video
• Transmits up to 1,312ft (400m) depending on format, resolution, and cable used
• PAL / NTSC / SECAM compatible
• Built-in TVS surge protection
• Anti-static and wave filters
• Lightning protection – Grade III
• 60dB Crosstalk and noise immunity
• Exceptional interference rejection
• Real-time transmission over low-cost Cat5e/6 cable instead of costly coaxial cable
• Quick-connect terminals for easy installation
• Small size allows mounting of multiple baluns behind a DVR
• Sold as Pair

• High quality imaging with 5 MP resolution
• Efficient H.265+ compression technology
• Clear imaging even with strong back lighting due to 120 dB WDR
• Up to 256 GB memory card slot for storage
• 2.8 to 12 mm motorized varifocal lens for easy installation and monitoring
• Water and dust resistant (IP67) and vandal proof (IK10)
• EXIR 2.0: advanced infrared technology with long IR range

• High quality imaging with 8 MP resolution
• Excellent low-light performance with powered-by-DarkFighter technology
• Efficient H.265+ compression technology
• Clear imaging against strong back light by 120 dB true WDR technology
• Focus on human and vehicle targets classification based on deep learning
• Water and dust resistant (IP67)

• High quality imaging with 5 MP resolution
• Efficient H.265+ compression technology
• Clear imaging even with strong back lighting due to 120 dB WDR
• Up to 256 GB memory card slot for storage
• 2.8 to 12 mm motorized varifocal lens for easy installation and monitoring
• Water and dust resistant (IP67)
• EXIR 2.0: advanced infrared technology with long IR range

• Elegant yet robust design – ideal for commercial applications and large residences
• Market-leading mirror optics offer exceptionally high detection sensitivity and immunity to false alarms
• Coverage area – 49 ft. / 90o
• Vandal-resistant design through patented V-Slot technology
• Front and Back tamper protection
• Adaptive, Active Infra-Red Anti-masking technology
• Easy to install, with no vertical adjustments
• Pet-immune – Target Specific Imaging™ distinguishes between humans and pets weighing up to 88 lbs.
• True Motion Recognition™ algorithm distinguishes between true motion of an intruder and any other disturbances, minimizing false alarms
• Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

* Twin beams provide reliable perimeter security, minimizing false alarms from falling leaves, etc.
* Lensed optics reinforce beam strength and provide excellent immunity to false alarms due to rain, snow, mist, etc.
* Weatherproof, sunlight-filtering case for indoor and outdoor use.
* Anti-frost system so that beam functions even in extreme conditions.
* Automatic input power filtering with special noise rejection circuitry.
* NC/NO alarm output.
* NC tamper circuit included.
* Non-polarized power inputs.
* Quick, easy installation with built-in laser beam alignment system.
* Adjustable interrupt time (50~700 ms)

• Magnetic lock supports static linear thrust of 280 kg (617 Lbs)
• Power supply can be 12VDC or 24VDC, (default voltage is 12VDC)
• Suitable for wooden door, glass door, metal door and fireproof door
• LED indicator displays door lock status
• Abrasion-proof materials

• High quality imaging with 5 MP resolution
• 24/7 colorful imaging
• Excellent low-light performance
• Water and dust resistant (IP67) and vandal resistant (IK08)
• Efficient H.265+ compression technology

• High quality imaging with 2 MP, 1920 × 1080 resolution
• 24/7 color imaging with F1.0 aperture
• 3D DNR technology delivers clean and sharp images
• 2.8 mm, 3.6 mm, 6 mmfixed focal lens
• Up to 20 m white light distance for bright night imaging
• One port for four switchable signals (TVI/AHD/CVI/CVBS)
• Water and dust resistant (IP67)

• High quality imaging with 2 MP resolution
• Excellent low-light performance via powered-by-DarkFighter technology
• Clear imaging against strong back lighting due to 120 dB WDR technology
• Pan and tilt ability enables camera to monitor zones of interest
• 25 × optical zoom allows for closer viewing of subjects in expansive areas
• Up to 100 m IR range ensures safety at night
• Water and dust resistant (IP66)

• 16 × 100 Mbps PoE RJ45 ports, 2 × gigabit combos.
• IEEE 802.3at/af standard for PoE ports.
• Network topology management, alarm push, network health monitor.
• 6 KV surge protection for PoE ports.
• AF/AT camera can reach up to 300 m in extend mode.

• High quality imaging with 5 MP resolution
• Efficient H.265+ compression technology
• Clear imaging even with strong back lighting due to 120 dB WDR
• Water and dust resistant (IP67) and vandal resistant (IK10)
• EXIR 2.0: advanced infrared technology with long IR range
• Support up to 256 GB memory card storage
• Built-in microphone for real-time audio security

• Cutting-edge glass break detection technology delivers near-zero false alarm rate
• Acoustic pattern recognition technology provides 360o coverage
• 25 ft. maximum detection range for plate, tempered, laminated, wired, coated and sealed insulating glass
• A single detector can protect rooms of up to 32.7 x 39.4 sq. ft.
• Battery life up to 5 years with typical use
• Configured from the keypad – no need to re-open the detector once closed
• Low battery indication
• Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

• Equipped with the 32-bit high-speed processor
• RS-485 and Wiegand (W26/W34) protocol, and OSDP protocol
• Build-in Mifare card reading module (Frequency: 13.56MHz).
• Supports tampering alarm
• Built-in buzzer for identifying the reading status
• Online upgrade function
• Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader

Wireless PowerG Door & Window Security Contact With Auxiliary Input

• Suitable for a wide range of residential and light commercial environments
• User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors)
• Optional, configurable auxiliary input enables installation of additional hardwired devices when necessary
• Auxiliary input can be enrolled as a separate zone
• Battery life of up to 8 years (with typical use)
• Configured from the keypad – no need to re-open the detector once closed
• Low battery indication
• Available in white and brown casing
• Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

• Responsive, high-resolution 7” (177.8 mm) full color touchscreen
• Intuitive menu-driven interface for the user Configurable home screen
• Built-in and easy-to-update digital picture frame using integrated SD card slot
• Simplified programing of labels using QWERTY keypad
• Clean, low-profile case in either white (HS2TCHP) or black (HS2TCHPBLK) blends into any décor
• Quick-view LED status indicators (Ready, Armed, Trouble and AC Power)
• Interactive Menu ready
• I/O terminal
• SD card GUI Local firmware update using SD card
• Prox support (using MPT prox tags)
• Multiple language support
• Available in white or black
• Approval Listings: FCC/IC, UL/ULC, SIA CP-01, CSFM